Monitor detection wireless DVR

Characteristics

1．Four channels (2.414 GHz, 2.432GHz, 2.450GHz, 2.468GHz) receive and strengthens flexibility and reliability.

2．Transmitter and receiver are used in pair or in one-to-some manner in the same

Channel (a transmitter transmits signals and some receivers receive them in the same channel. The receipt is synchronous and precise, equivalent to wireless video distributor), and they can be used in some-to-some manner (each transmitter occupies a channel, and can support video and audio transmission of four channels at most, and they will not disturb each other).

3．Video transmission in the system of NTSC or PAL and stereo audio transmission

4．The A/V input terminal of the receiver can be connected with the equipment with audio and video output such as video recorder.

5．2.4G～2.4835GHz belongs to the frequency range S, and this frequency range

is known as ISM (industry science medical). It belongs to the frequency range of industrial free radiation and is not restricted by radio committee, and it will not cause any hurt to people’s health. This working frequency range has few of interference, and image transmission effect will be better.

6．The max capacity of the unit supports 16GByte.

7．The unit has its unique functions including mobile detection recording, alarm in, motion detection, reset time recording, manual starting.

Functions

Power: 5V DC input

Lithium battery: 3.7V        1800mAh

LCD panel:2.5〞TFT 960 x 240

Video input: NTSC/PAL Composite, 1V pk-pk, 75ohm

Video output: NTSC/PAL Composite, 1V pk-pk, 75ohm

Recording system: MPEG4 或 Motion JPEG* Recording resolution:640 x 480 (VGA)

Frame rate: 1fps, 5fps, 10fps, 15fps, 20fps, 25fps, and 30fps

Storage media: SD, SDHC Max capacity support: 16GByte

Recording starting manner: alarm in, motion detection, reset time recording, manual starting.

*   When the frame rate is 1fps or advanced recording function starts, the recording format is Motion JPEG.